Repeater Mode - D-Link DIR-505L User Manual

Section 3 - Configuration
Wireless Mode:

Repeater Mode.

Site Surveys: Scans for available Wi-Fi networks.
Wi-Fi Network When you are browsing for available wireless networks, this
Name: is the name that will appear in the list (unless Visibility Status
is set to Invisible, see below). This name is also referred to
as the SSID. For security purposes, it is highly recommended
to change from the default network name.
Channel Width: Select the appropriate channel width between 20MHz or
Auto 20/40MHz from the drop-down menu.
Security Mode: Select WEP or WPA Personal. Refer to page 88.
Wi-Fi Protected Click Enable to activate the Wi-Fi Protected Setup (WPS)
Setup:
feature.
D-Link DIR-505L User Manual
Repeater Mode
104