D-Link DIR-505L User Manual page 94

Section 3 - Configuration
Add Wireless
This wizard helps you add wireless devices to the wireless network.
Devices with
WPS:
The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the
PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a
configuration button, you can add it to the network by pressing the configuration button on the device and then the on the router
within 120 seconds. The status LED on the router will flash three times if the device has been successfully added to the network.
There are several ways to add a wireless device to your network. A "registrar" controls access to the wireless network. A registrar
only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on
the device. The router acts as a registrar for the network, although other devices may act as a registrar as well.
D-Link DIR-505L User Manual 88