Manual Internet Setup; Dynamic (Cable) - D-Link DIR-505L User Manual

Section 3 - Configuration
My Internet Select Dynamic IP (DHCP) to obtain IP address information
Connection: automatically from your ISP. Select this option if your ISP
does not give you any IP numbers to use. This option is
commonly used for cable modem services.
Host Name:
The Host Name is optional but may be required by some
ISPs. Leave blank if you are not sure.
Use Unicasting:
Check the box if you are having problems obtaining an
IP address from your ISP.
Primary/Secondary
Enter the Primary and secondary DNS server IP addresses
DNS Server:
assigned by your ISP. These addresses are usually obtained
automatically from your ISP. Leave at 0.0.0.0 if you did not
specifically receive these from your ISP.
MTU:
Maximum Transmission Unit - you may need to change
the MTU for optimal performance with your specific ISP.
1500 is the default MTU.
MAC Address:
The default MAC address is set to the Internet port's
physical interface MAC address on the broadband router.
It is not recommended that you change the default MAC
address unless required by your ISP. You can use the Copy
Your PC's MAC Address button to replace the Internet
port's MAC address with the MAC address of your Ethernet
card.
D-Link DIR-505L User Manual

Manual Internet Setup

Dynamic (Cable)

36