D-Link DIR-505L Quick Install Manual

Quick Install Guide
SharePort Mobile Companion
Start Here - Select The Mode
Router Mode
This feature behaves as a router in areas where you
cannot take your home router so that you may
wirelessly connect to the internet.
QRS Mobile Setup For Router Mode (iPhone and iPad Only)
2
1
Router/AP Power off
Charger
Power off Router/AP
Charger
Repeater
Router/AP
Wi-Fi
Repeater
Hotspot
Wi-Fi
Hotspot
Outlet
Settings
Scan the QRS Mobile code
Move the switch on the DIR- Wireless Utility to displays the available
to download QRS Mobile
505L to "Router/AP Mode" wireless networks and select the Wi-Fi
App from the App Store to and plug it into a wall outlet. name that is shown on your companion
your iPhone or iPad. You can card (ex: dlink-a8fa). Then, enter the
also search "QRS Mobile"
From your iOS mobile device, Wi-Fi password included in your card (ex:
from the App Store.
click Settings. Then, click akbdj19368).
Wi-Fi.
Router/Access Point Mode
2
1
Router/AP
Power off
Charger
Router/AP
Repeater
Wi-Fi
Hotspot
Ethernet
Outlet
Find an outlet close to an Internet- enabled device.
Connect one end of the Ethernet cable into the
Then, move the switch to "Router/AP Mode" and plug
Ethernet port of the Internet-enabled device (e.g.
the DIR-505L into a wall outlet. Verify that the power
modem, router) and then plug the other end of this
LED has turned green. cable into the Ethernet port of the DIR-505L.
Repeater Mode Repeater Mode
2
1
Repeater Power off
Charger
D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note
Router/AP
Repeater Web browser link:
Wi-Fi http://dlinkrouter or
Hotspot http:// 192.168.0.1
Default configuration
Username: "Admin"
Password: "" (leave the field blank)
Wi- Fi Name (SSID) :
54mm dlinka8fa
Wi-Fi Password :
akbdj19368
Move the switch to "Repeater
From your laptop or mobile device go
Mode". Then, plug the DIR-505L
to your Wireless Utility to display the
into a wall outlet and verify that
available wireless networks and select
the power LED has turned green. the network that is displayed on your
companion card (ex: dlink-a8fa). Then,
enter the Wi-Fi password included in your
card (ex: akbdj19368).
All manuals and user guides at all-guides.com
If any of the above items are missing, please contact your reseller.
Operation Mode
Charger Mode is only used to charge your mobile
device such as an iPad, iPhone & Android etc. While
the DIR-505L is on charge mode, all other functions
will be disabled.
DIR-505L
AP Mode
Use Access Point (AP) mode if you want to connect
wireless clients (such as laptops, tablets, smartphones, and
media players) to your wired network (via router, switch, or
PowerLine devices).
3
4
90mm
D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note
Web browser link: Web browser link:
http://dlinkrouter or http://dlinkrouter or
http:// 192.168.0.1 http:// 192.168.0.1
Default configuration Your configuration
Username: "Admin" Username: Admin
Password: "" (leave the field blank) Password:
Wi- Fi Name (SSID) :
54mm Wi- Fi Name (SSID) :
dlinka8fa
Wi-Fi Password :
Outlet Ethernet
akbdj19368 Wi-Fi Password :
Ethernet
Once it connected, click on the QRS
Mobile icon from your iOS mobile
device. Then click Start to continue.
3
Internet
54mm
From your laptop or mobile device go to your
Wireless Utility to display the available wireless
networks and select the Wi-Fi name that is shown
on your companion card (ex: dlink-a8fa). Then,
enter the Wi-Fi password included in your card
(ex: akbdj19368).
3
4
90mm
Web browser link:
http://dlinkrouter or
http:// 192.168.0.1
Your configuration
Username: Admin
Password:
Wi- Fi Name (SSID) :
Wi-Fi Password :
Open a web browser and type Select the configuration method and click
http://dlinkrouter (Windows) or Next.
http://dlinkrouter.local (Mac/
iPhone/iPad) . Please follow the For Manual configuration, select the Wi-Fi
on-screen instructions to complete
network you would like the DIR-505L to
the setup. connect to wirelessly.
Package Contents QRS Mobile App for iOS Device
• SharePort Mobile Companion
Scan this QR code using your iOS mobile
• Ethernet Cable
device. You will be directed to the App store
to download the QRS Mobile App so that
you may begin the Installation process.
SharePort Mobile App for iOS Device
Scan this QR code using your iOS
mobile device to download the App
LEDs
and begin file sharing.
Power LED - A solid green light indicates
Requirements: Compatible with
a proper connection to the power supply.
iPhone, iPod touch and iPad. Requires
The light will be solid red during boot up
iOS 4.3 or later.
and during a factory reset.
Note: The SharePort Mobile App only
Pleaser refer to the user manual for further works on Router and Wi-Fi Hotspot
information regarding SharePort Mobile Mode.
App. Please download the user manual from
http://www.dlink.com/support/
Repeater Mode
This feature extends your wireless coverage allowing you
to share your wireless signal with all your portable devices Start Here
such as your mobile device or laptop.
5 6
Once the screen appears, you
Please follow the on-screen
have successfully completed the
instructions to complete the setup.
setup. Please click Save and write
down the Wi-Fi Name (SSID) and
password on your companion
card for future reference.
4
90mm
D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note
Web browser link: Web browser link:
http://dlinkrouter or http://dlinkrouter or
http:// 192.168.0.1 http:// 192.168.0.1
Default configuration Your configuration
Username: "Admin" Username: Admin
Password: "" (leave the field blank) Password:
Wi- Fi Name (SSID) :
Wi- Fi Name (SSID) :
dlinka8fa
Wi-Fi Password :
akbdj19368 Wi-Fi Password :
Open a web browser. First time users will
automatically be directed to the setup wizard. Please
follow the on-screen instructions to complete the setup.
If this is your second time type http://dlinkrouter
(Windows) or http://dlinkrouter.local (Mac/iPhone/
iPad) in the address bar. Once the setup is complete
then proceed to the next step.
5
Enter the Wi-Fi Password and click Next.
Once the second screen appears, you have
successfully completed the setup. Please
click Save and write down the Wi-Fi Name
(SSID) and Password on your companion card
for future reference.
Wi-Fi Hotspot Mode
This feature allows you to have your own private network
from anywhere that you may travel.
7
From your iOS mobile device go
to your wireless utility to display
the available wireless networks
and select the network that you
created for internet access.
5
From your laptop or mobile device go to
your wireless utility to display the available
wireless networks and select the network
that you created for Internet access.
6
From your laptop or mobile device
go to your wireless utility to display
the available wireless networks and
select the network that you previously
connected to in Step 5 for internet access.