Maintenance; Admin - D-Link DIR-505L User Manual

Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Password:
Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Enable
Enables a challenge-response test to require users to type letters
Graphical
or numbers from a distorted image displayed on the screen to
Authentication:
prevent online hackers and unauthorized users from gaining
access to your router's network settings.
Enable HTTPS
Check to enable HTTPS to connect to the router securely. This
Server:
means to connect to the router, you must enter "https:" instead
of "http:" (for example) https://192.168.0.1.
Enable Remote
Remote management allows the DIR-505L to be configured from
Management:
the Internet by a web browser. A user name/password is still
required to access the Web Management Interface.
Remote Admin
The port number used to access the DIR-505L is used in the URL.
Port:
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-505L and 8080 is the port used for the Web Management
Interface.
If you have enabled HTTPS Server, you must enter https:// as part of the URL to access the router remotely.
D-Link DIR-505L User Manual

Maintenance

Admin

68