Connect A Wireless Client To Your Router; Wps Button - D-Link DIR-825+ User Manual

Section 5 - Connecting to a Wireless Network

Connect a Wireless Client to Your Router

The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers, and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-825+ router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DIR-825+ for about 1 second. The wireless LED on the front will start to blink.
Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the WPS LED stops blinking, you will be connected
and your wireless connection will be secure with WPA2.
D-Link DIR-825+ User Manual

WPS Button

WPS Button
145