Inserting A Pause; Printing A Panel Settings Report; Changing The Language; When Using The Operator Panel - Dell C3765dnf Color Laser Printer User Manual

Inserting a Pause

For some telephone systems, it is necessary to dial an access code and listen for a second dial tone. A pause must be
entered in order for the access code to function. For example, enter the access code 9 and then press the
(Redial/Pause) button before entering the telephone number. "-" appears on the display to indicate when a pause is
entered.

Printing a Panel Settings Report

The panel settings report shows current settings for the printer menus. For details about how to print a panel settings
report, see "Report / List."

Changing the Language

To change the language used on the touch panel:

When Using the Operator Panel

1 Press the (Information) button.
2 Select the Tools tab, and then select Panel Language.
3 Select the until the desired language appears, and then select the desired language.
4 Select OK.

When Using the Tool Box

1 Click Start All Programs
→
NOTE:
For details about starting the Tool Box, see "Starting the Tool Box."
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Panel Language from the list at the left side of the page.
The Panel Language page appears.
4 Select the desired language from Panel Language, and then click Apply New Settings.

Setting the Power Saver Timer Option

You can set the power saver timer for the printer. The printer enters the power saver mode when the printer is not
used for a certain period of time.
NOTE:
If the
Panel Lock Control
menu.
Settings
To set the power saver timer:
1 Press the (Information) button.
2 Select the Tools tab, and then select Admin Settings.
3 Select until System Settings appears, and then select System Settings.
4 Select
until General appears, and then select General.
5 Select until Power Saver Timer appears, and then select Power Saver Timer.
6 Select Sleep or Deep Sleep.
Dell Printers Dell C3765dnf Multifunction Color Laser Printer
→ →
is set to
Enable
, you need to enter the four digit password to enter the
Tool Box.
→
Admin
133
Operator Panel