Dell C3765dnf Color Laser Printer User Manual page 207

Alert Tone
Out of Paper Alert Tone
Low Toner Alert Tone
Auto Clear Alert Tone
System Settings - Timers Auto Reset
Fault Time-out
Job Time-out
System Settings - Default Paper Size
Output Settings
Print ID
Print Text
Banner Sheet Insert Position
Banner Sheet Specify Tray
Substitute Tray
Letterhead 2 Sided
Enable A4<>Letter Switch
Report 2 Sided Print
Use Another Tray
Service Tools - Paper Plain
Density
Label
Service Tools - Auto Auto Registration Adjustment
Registration Adjustment
Service Tools - Non-Dell Non-Dell Toner
Toner
Service Tools - Adjust Adjust Altitude
Altitude
*1
This item is not available when the optional hard disk is installed.
Displays the volume of the tone that is emitted when a
problem occurs. Off indicates that the tone is disabled.
Displays the volume of the tone that is emitted when the
printer runs out of paper. Off indicates that the tone is
disabled.
Displays the volume of the tone that is emitted when the
toner is low. Off indicates that the tone is disabled.
Displays the volume of the tone that is emitted 5 seconds
before the printer performs auto clear. Off indicates that
the tone is disabled.
Displays the amount of time before the printer
automatically resets the settings on the operator panel to
the defaults when no additional settings are made.
Displays the amount of time the printer waits before
canceling a job that stops abnormally.
Displays the amount of time the printer waits for data to
arrive from the computer.
Displays the default paper size.
Displays where to print a user ID on the output paper.
Displays whether the printer outputs PDL (Page
Description Language) data (which is not supported by
the printer) as text when the printer receives it.
Displays where to insert the banner sheet.
Displays the banner sheet tray.
Displays an indication to use paper of a different size
when the paper that is loaded in the specified tray does
not match the paper size settings for the current job.
Displays whether to print on both sides of a sheet of
letterhead paper.
Displays whether to print A4 size jobs on Letter size paper
if A4 is not available in the paper trays and vice versa
(Letter size job on A4 size paper).
Displays whether to print reports on both sides of a sheet
of paper.
Displays whether to show a message to select another tray
when the specified paper is not available in the paper tray.
Displays the plain paper density settings.
Displays the label paper density settings.
Displays whether to automatically adjust color
registration.
Displays whether to use toner cartridge of another
manufacturer.
Displays the altitude of the location where the printer is
installed.
Understanding the Tool Box Menus
205