Dell C3765dnf Color Laser Printer User Manual page 386

a. Transmission image quality
Purpose:
To set the output quality.
Values:
Standard
High Quality*
Super-high image quality
* Denotes the factory default setting.
NOTE:
Faxes printed in the Super-high image quality by Direct Fax driver transmits at the highest resolution supported by the
receiving device.
b. Transmission report
Purpose:
To specify whether to print a fax transmission result.
Values:
Output regularly
Output for non-transmission*
Do not output
* Denotes the factory default setting.
c. Fax Cover Page
Purpose:
To specify whether to attach a cover page to your fax.
Values:
According to Printer Settings
Attach
None*
* Denotes the factory default setting.
Sender
Purpose:
To specify whether to print the sender's name on the fax cover page.
Values:
According to Printer Settings*
Enter a sender name
* Denotes the factory default setting.
384
Faxing
For documents with normal sized characters.
For documents containing small characters or thin lines or documents printed using a dot-
matrix printer.
For documents containing extremely fine detail. The super fine mode is enabled only if the
remote machine also supports Super Fine resolution. See the notes below.
Prints a transmission result after every fax transmission.
Prints a transmission result only when an error occurs.
Does not print fax transmission results.
Determines whether to attach a cover page to your fax depending on the setting you specify in
Fax Cover Page on the operator panel.
Attaches a cover page to your fax.
Does not attach a cover page to your fax.
Determines whether or not to print the sender's name on the fax cover page based on the
printer settings.
Allows you to enter a sender's name that will be printed on the fax cover page in Sender
Name.