A local printer is a printer attached to your computer or a print server using a USB or parallel cable.
If your printer is attached to a network and not your computer, see "Setting Up for Network
Printing" on page 23.
Installing Printer Drivers
Connecting the Printer to the Computer Before Inserting the Drivers and Utilities CD
NOTE:
Using this setup method, make sure your printer is not connected to your computer when you
begin.
After the printer driver has been installed, you need to do the Installable Options settings in Printer
Property are needed according to the options you installed.
Windows 98, Me, 2000, XP and Server 2003
Connect your printer to your computer.
1.
When the Found New Hardware Wizard appears, click Cancel.
2.
Insert the
3.
Click Personal Installation.
4.
Click Install. The Found New Hardware Wizard appears.
5.
Click Next. The wizard automatically finds and installs the corresponding printer driver.
6.
When the Complete the Found New Hardware Wizard screen appears, click Finish.
7.
Select either the Typical Installation or Custom Installation checkbox, and then click Next.
8.
If you select Custom Installation, you can select the specific software you want to install.
When using Windows 98 or Me, the Adobe License Agreement appears, click to accept the
9.
agreement and then click Install.
When the Congratulations! screen appears, in Windows 2000, Windows XP, and Server 2003,
10.
click Printer Test Page if necessary. Click Finish.
Click Cancel.
11.
Windows 95 and NT 4.0
Connect your printer to your computer.
1.
Insert the
2.
20
Setting Up for Local Printing
Drivers and Utilities
CD into your computer.
Drivers and Utilities
CD into your computer.