Adjusting The Document Contrast; Sending A Fax From Memory - Dell C3765dnf Color Laser Printer User Manual

3 Select Resolution.
4 Select the desired setting, and then select OK.
Standard*
Fine
Super Fine
Photo
* Denotes the factory default setting.
NOTE:
Faxes scanned in the Super Fine resolution transmit at the highest resolution supported by the receiving device.

Adjusting the Document Contrast

You can adjust the contrast of the fax document to be lighter or darker than the original.
1 Load the document(s) facing up with top edge in first into the DADF.
OR
Place a single document facing down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document."
2 Press the (Home) button.
3 Select Fax.
4 Select Darken/Lighten.
5 Select the desired level on the Darken/Lighten bar, and then select OK.
You can select a contrast level from seven levels between Darken and Lighten.
Selecting a cell on the left side of the bar makes the document contrast darker, and selecting a cell on the right side
of the bar makes the document contrast lighter.
Darken3
Darken2
Darken1
Normal*
Lighten1
Lighten2
Lighten3
* Denotes the factory default setting.

Sending a Fax From Memory

1 Load the document(s) facing up with top edge in first into the DADF.
OR
Place a single document facing down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document."
2 Press the (Home) button.
Used for documents with normal sized characters.
Used for documents containing small characters or thin lines or documents printed using a
dot-matrix printer.
Used for documents containing extremely fine detail. The super fine mode is enabled only if
the remote machine also supports the Super Fine resolution. See the note below.
Used for documents containing photographic images.
Works well with light documents or faint pencil markings.
Works well with standard typed or printed documents.
Works well with dark documents.
379
Faxing