Dell C3765dnf Color Laser Printer User Manual page 189

Values:
Proxy Server Use Proxy Server
Address to Bypass Proxy
Server
Server Name
Port Number
Authentication
Login Name
Password
Retype Password
Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize
NVRAM of the printer from Reset Defaults in the Printer Settings menu.
Values:
Initialize NIC NVRAM Memory
and restart printer.
Restart Printer
Security
The Security tab includes Set Password, Authentication System, Kerberos Server, LDAP Server, LDAP
Authentication, LDAP User Mapping, SSL/TLS, IPsec, 802.1x, IP Filter (IPv4), and SMTP Domain Filtering.
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame.
NOTE:
To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
NOTE:
You can set the password for access to
Values:
Administrator Password
Re-enter Administrator Password
Access denial by the authentication
failure of the Administrator
Authentication System
Purpose:
To specify the server authentication type, the server response time-out, or the search time-out.
Sets whether to enable the use of a proxy server.
Sets the address to bypass proxy server.
Sets the name of the proxy server.
Sets the port number from 1 to 65535.
Sets whether to enable authentication.
Sets the login name for the proxy server.
Sets the login password for the proxy server.
Confirms the set password.
Click Start to initialize NVRAM, revert network settings to the factory default settings, and
reboot the network capability.
Click Start to reboot the printer.
Admin Settings
Sets the password using up to 128 alphanumeric characters.
Confirms the set password.
Sets the amount of time the administrator should wait for the access to the printer
setup from Dell Printer Configuration Web Tool. Sets the time period from 5 to 255
seconds. The access is denied if the time-out time is exceeded. If you set 0, this mode
is disabled.
from Panel Lock in Printer Settings.
Dell™ Printer Configuration Web Tool
187