Dell C3765dnf Color Laser Printer User Manual page 447

Error-Code What you can do
016-542 A server certificate error has occurred when acquiring the certificate with the operation of WPA-Enterprise
or WPA2-Enterprise. This is a problem in the server certificate, such as the validity period has expired for
the server certificate being used with the Radius server. Ask your system administrator to confirm the server
certificate being used with the Radius server.
016-543 A wireless certificate (server or client) corruption error has occurred while using the Wireless LAN
WPA-Enterprise or WPA2-Enterprise. Ask your system administrator to connect the printer with a wired
network, initialize the wireless settings, import the wireless certificate, and set WPA-Enterprise or
WPA2-Enterprise again.
016-720 Error relating to PDL emulation problems has occurred. Change the Print Mode setting in the Graphics tab
of the printer driver. Contact customer support if this failure is repeated.
016-756 Printing in the prohibited time. Contact your system administrator.
016-757 The account is not registered. Contact your system administrator.
016-758 The function cannot be used. Contact your system administrator.
016-759 Printable page limit is exceeded. Contact your system administrator.
016-764 An error occurs when the printer connected to the SMTP server. Select
the printer to recover. Check the SMTP server settings or contact the SMTP server administrator.
016-765 The capacity of the SMTP server is not enough. Select
recover. Contact the SMTP server administrator.
016-766 The e-mail exceeds the SMTP server size restriction. Select
recover. Contact the SMTP server administrator.
016-767 The e-mail address of the recipient is incorrect. Select
recover. Check e-mail address, and try scanning again.
016-768 The e-mail address of the sender is incorrect. Select
recover. Check e-mail address, and try scanning again.
016-786 A timeout error occurs when sending or receiving scanned data. Select
the printer to recover. Check if the Ethernet cable is connected properly. If there is no problem with the
Ethernet cable, contact server administrator.
016-790 Network connection error. (IP address is not determined.) Select
printer to recover. Check if the Ethernet cable is connected properly. If there is no problem with the
Ethernet cable, contact server administrator.
016-799 Select
Close
printer on the printer driver.
016-930 The device is not supported. Remove it from the front USB port.
016-931 The USB hub is not supported. Remove it from the front USB port.
016-985 Select Close
setting or changing the file format of the scanned image.
016-986
024-920 Remove the paper from the output tray.
024-927 Check the toner gauge on the touch panel for an empty toner cartridge. Remove the empty toner cartridge,
and install a new cartridge. For more information about replacing the toner cartridge, see "Replacing the
Toner Cartridges."
024-965 Confirm that the size and type specified in the tray settings matches the size and type of paper loaded in the
tray.
024-966
024-969
026-721 Check your USB memory:
• If the file size or the number of files exceeds the limit of your USB memory.
• If your USB memory is write-protected.
to clear the message and cancel the current print job. Confirm the configuration of the
, or wait for 60 seconds for the printer to recover. Retry scanning by lowering the resolution
, or wait for 60 seconds for
Close
, or wait for 60 seconds for the printer to
Close
, or wait for 60 seconds for the printer to
Close
, or wait for 60 seconds for the printer to
Close
, or wait for 60 seconds for the printer to
Close
Close , or wait for 60 seconds for
, or wait for 60 seconds for the
Close
Understanding Printer Messages
445