System Settings - Output Settings - Dell C3765dnf Color Laser Printer User Manual

System Settings - Output Settings

Purpose:
To configure the setting of the print ID, substitute tray, and other settings.
Values:
Default Paper Size
Print ID
Print Text
Banner Sheet Insert
Position
Banner Sheet Specify Tray MPF
Substitute Tray
Letterhead 2 Sided
Enable A4<>Letter
Switch
Report 2 Sided Print
Use Another Tray
Apply New Settings
Restart printer to apply new settings
*1
This item is available only when the optional 550-sheet feeder is installed.
214
Understanding the Tool Box Menus
A4 (210x297mm)
Letter (8.5x11")
Off
Top Left
Top Right
Bottom Left
Bottom Right
Off
On
Off
Front
Back
Front & Back
Tray 1
*1
Tray 2
Off
Larger Size
Nearest Size
Use MPF
Disable
Enable
On
Off
1 Sided
2 Sided
On
Off
Sets the default paper size.
Does not print the user ID.
Prints the user ID on the specified location.
Does not print the received PDL data as text data.
Prints the received PDL data as text data.
Does not insert the banner sheet.
Sets where to insert the banner sheet.
Sets the tray for the banner sheet.
No tray size substitute accepted.
Substitutes paper of next largest size. When there is no
larger paper size, the printer substitutes paper of nearest
size.
Substitutes paper of nearest size.
Substitutes paper from the MPF.
Does not print on both sides of a sheet of letterhead paper.
Prints on both sides of a sheet of letterhead paper.
Prints A4 size jobs on Letter size paper if A4 is not
available in the paper trays and vice versa (Letter size job
on A4 size paper).
Does not print A4 size jobs on Letter size paper or Letter
size jobs on A4 paper.
Prints reports on one side of a sheet of paper.
Prints reports on both sides of a sheet of paper.
Sets to show a message to select another tray when the
specified paper is not available in the paper tray.
Does not print on other paper sizes in other paper trays if
the paper size specified in the job is not available.
After you change the settings, click this button to apply
the changes.
Click this button to apply the changes.