Client Alerts Link; Ids Link; Figure 103 Throughput Graph; Table 21 Virtual Controller View-Graphs And Monitoring Procedures - Dell PowerConnect W-IAP175P User Manual

Throughput Graph

Figure 103
For more information about the graphs in the Virtual Controller view and for monitoring procedures, see
21.
Table 21
Graph Name
Clients
Throughput

Client Alerts Link

For information about the Client Alerts link, see
Types and Management"

IDS Link

For information about the IDS link, see
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide
Throughput Graph
Virtual Controller View—Graphs and Monitoring Procedures
Description
The Clients graph shows the number of clients
associated with the Virtual Controller for the last 15
minutes.
To see an enlarged view, click the graph.
 The enlarged view provides Last, Minimum,
Maximum, and Average statistics for the number
of clients associated with the Virtual Controller for
the last 15 minutes.
To see the exact number of clients in the Dell

Instant network at a particular time, hover the
cursor over the graph line.
The Throughput graph shows the throughput of all
networks and IAPs associated with the Virtual
Controller for the last 15 minutes.
Outgoing traffic—Throughput for outgoing traffic

is displayed in green. Outgoing traffic is shown
above the median line.
Incoming traffic—Throughput for incoming traffic

is displayed in blue. Incoming traffic is shown
below the median line.
To see an enlarged view, click the graph.
The enlarged view provides Last, Minimum,

Maximum, and Average statistics for the incoming
and outgoing traffic throughput of the Virtual
Controller for the last 15 minutes.
To see the exact throughput of the Dell Instant
network at a particular time, hover the cursor over the
graph line.
chapters.
Chapter 2, "Instant User Interface"
Chapter 2, "Instant User Interface"
Monitoring Procedure
To check the number of clients associated with the
Virtual Controller for the last 15 minutes,
1. Log in to the Instant UI. The Virtual Controller
view appears. This is the default view.
2. Study the Clients graph in the Usage Trends
pane. For example, the graph on the left shows
that one client is associated with the Virtual
Controller at 11:43 hours.
To check the throughput of the networks and IAPs
associated with the Virtual Controller for the last 15
minutes,
1. Log in to the Instant UI. The Virtual Controller
view appears. This is the default view.
2. Study the Throughput graph in the Usage
Trends pane. For example, the graph on the left
shows 2.0 kbps outgoing traffic throughput at
12:00 hours. It also shows some incoming
traffic throughput at the same time.
and Chapter 19, "Alert
.
Table
Monitoring | 137