Configuring Airwave; Creating Your Organization String; About Shared Key; Figure 99 Adding An Iap In Visualrf - Dell PowerConnect W-IAP175P User Manual

the ability to plan the wireless coverage of new sites. VisualRF uses sophisticated RF fingerprinting to accurately
display coverage patterns and calculate the location of every Instant device in range. VisualRF provides graphical
access to floor plans, client location, and RF visualization for floors, buildings, and campuses that host your
network.
Figure 99

Configuring AirWave

This section describes how to configure AirWave. Before configuring the AirWave, you need the following:
IP address of the AirWave server.

Shared key for service authorization—This is assigned by the AirWave administrator.


Creating your Organization String

The Organization String is a set of colon-separated strings created by the AirWave administrator to accurately
represent the deployment of each Dell Instant system. This string is entered into the Dell Instant UI by the on-
site installer.
AMP Role: "Org Admin" (initially disabled)

AMP User: "Org Admin" (assigned to the role "Org Admin")

Folder: "Org" (under the Top folder in AMP)

Configuration Group: "Org"

Additional strings in the Organization String are used to create a hierarchy of sub folders under the folder
named "Org":
subfolder1 would be a folder under the "Org" folder

subfolder2 would be a folder under subfolder1


About Shared Key

The Shared Secret key is used by the administrator to manually authorize the first Virtual Controller for an
organization. Any string is acceptable.
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide
Adding an IAP in VisualRF
Airwave Integration and Management | 133