Disabling Captive Portal Authentication; Figure 69 Customizing A Splash Page; Figure 70 Disabling Captive Portal Authentication - Dell PowerConnect W-IAP175P User Manual

Figure 69
4. Click Next and then click Finish.

Disabling Captive Portal authentication

To disable captive portal authentication, perform the following steps:
1. In the Network tab, click the guest network for which you want to disable captive portal authentication. The
edit link for the network appears.
2. Click the edit link. The Edit box for the network appears.
3. Click Next and clear the Splash page check box in the Security tab.
Figure 70
4. Click Next and click Finish.
88 | Authentication
Customizing a Splash Page
Disabling Captive Portal Authentication
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide