Figure 47
4. Select the Get IP address from DHCP server or Specify statically option. If you selected the Specify
statically option, perform the following steps:
1. Enter the new IP address for the IAP in the IP address text box.
2. Enter the netmask of the network in the Netmask text box.
3. Enter the IP address of the default gateway in the Default gateway text box.
4. Enter the IP address of the DNS server in the DNS server text box.
5. Enter the domain name in the Domain name text box.
Figure 48
5. Click OK, and reboot the IAP.
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide
Configuring IAP Settings—Connectivity Tab
Configuring IAP Connectivity Settings—Specifying Static Settings
Managing IAPs | 65