Chapter 15 Intrusion Detection System; Rogue Ap Detection And Classification; Wireless Intrusion Protection (Wip); Figure 91 Intrusion Detection - Dell PowerConnect W-IAP175P User Manual

Instant access point 6.1.2.3-2.0.0.0
Hide thumbs Also See for PowerConnect W-IAP175P:
Table of Contents

Advertisement

Intrusion Detection System (IDS) is a feature that monitors the network for the presence of unauthorized IAPs
and clients. It also logs information about the unauthorized IAPs and clients, and generates reports based on the
logged information.

Rogue AP Detection and Classification

The most important IDS functionality offered in the Dell Instant network is the ability to detect rogue APs,
interfering APs, and other devices that can potentially disrupt network operations. An AP is considered to be a
rogue AP if it is both unauthorized and plugged into the wired side of the network. An AP is considered to be an
interfering AP if it is seen in the RF environment but is not connected to the wired network. While the
interfering AP can potentially cause RF interference, it is not considered a direct security threat since it is not
connected to the wired network. However, an interfering AP may be reclassified as a rogue AP.
Figure 91

Wireless Intrusion Protection (WIP)

WIP offers a wide selection of intrusion detection and protection features to protect the network against wireless
threats. Like most other security-related features of the Dell network, the WIP configuration can be done on the
IAP.
An administrator can configure the following five main options.
Infrastructure Detection Policies: Specifies which wireless attacks on access points to detect
Client Detection Policies: Specifies which wireless attacks on clients to detect
Infrastructure Protection Policies: Specifies which wireless attacks on access points to protect against
Client Protection Policies: Specifies which wireless attacks on clients to protect against
Containment Methods: To prevent unauthorized stations from connecting to your Instant network.
In each of these options there are several default levels that enable different sets of policies. An administrator can
customize (enable/disable) these options accordingly.
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide
Intrusion Detection
Chapter 15
Intrusion Detection System
Intrusion Detection System | 121

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-iap3wnPowerconnect w-series

Table of Contents