Destination Options; Example Access Rules; Allow Tcp Service To A Particular Network; Table 14 Destination Options - Dell PowerConnect W-IAP175P User Manual

Table 13
Service
snmp
snmp-trap
svp
tftp

Destination Options

Table 14
these destinations depending on your requirements.
Table 14
Destination
To all destinations
To a particular server
Except to a particular server
To a network
Except to a network

Example Access Rules

This section provides procedures to create the following access rules.

Allow TCP service to a particular network


Allow PoP3 service to a particular server

Deny FTP service except to a particular server

Deny bootp service except to a particular network

Allow TCP service to a particular network
1. Click the New link in the Networks tab.
To define the access rule to an existing network, click the network. The edit link appears. Click the edit link
and navigate to the Access tab.
2. In the Basic Info tab, enter the appropriate information.
3. Click Next and set appropriate values in the Security tab.
4. Click Next. The Access tab appears. The Allow any to all destinations access rule is enabled by default. This
rule allows traffic to all destinations. To define allow TCP service access rule to a particular network, perform
the following steps:
a. Click New, the New Rule box appears.
b. Select Allow from the Action drop-down list.
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide
Network Service Options (Continued)
lists the destination options available in the Instant UI. You can allow or deny access to any or all of
Destination Options
Description
Simple network management protocol
Simple network management protocol-trap
Software Validation Protocol
Trivial file transfer protocol
Description
Access is allowed or denied to all destinations.
Access is allowed or denied to a particular server. You have to specify the IP
address of the server.
Access is allowed or denied to servers other than the specified server. You have to
specify the IP address of the server.
Access is allowed or denied to a network. You have to specify the IP address and
netmask for the network.
Access is allowed or denied to networks other than the specified network. You
have to specify the IP address and netmask for the network.
Instant Firewall | 105