Configuring Radio Profiles In Instant; Figure 90 Radio Profile; Table 15 Radio Profile Configuration Parameters - Dell PowerConnect W-IAP175P User Manual

Configuring Radio Profiles in Instant

Dell Instant supports radio profile configuration. The radio settings are available for both the 2.4-GHz and the 5-
GHz radio profiles. You can configure the radios separately, using the parameters described in table on each
radio.
Use the following procedure to configure Instant's radio attributes for the 2.4GHz and 5GHz frequency bands.
Figure 90
1. Navigate to Settings > Radio in the UI.
2. Configure the radio settings described in
Table 15
Parameter
Legacy only
802.11d / 802.11h
Beacon interval
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide
Radio Profile
Radio Profile Configuration Parameters
Table 15 for bands—2.4GHz and 5GHz.
Description
Enable to run the radio in non-802.11n mode.
This is disabled by default.
Enable the radio to advertise its 802.11d (Country Information) and
802.11h (Transmit
Power Control) capabilities.
This is disabled by default.
Enter the Beacon period (60ms to 500mps) for the IAP in msec. This
indicates how often the 802.11 beacon management frames are
transmitted by the access point.
The default value is 100 msec.
Adaptive Radio Management | 119