Figure 19 Alerts Link; Figure 20 Client Alerts - Dell PowerConnect W-IAP175P User Manual

Figure 19
Client Alerts
These alerts occur when clients are connected to the Instant network. A Client Alert consists of the following
fields:
Timestamp—Displays the time at which the client alert was recorded.

Mac address—Displays the Mac address of the client which caused the alert.

Description—Provides a short description of the alert.

Access Points—Displays the IP address of the IAP to which the client is connected.

Details—Provides complete details of the alert.

Figure 20
Fault History
These alerts occur in the event of a system fault. A Fault History consists of the following fields:
Time—Displays the system time when an event occurs.

Number—Indicates the number of sequence.

Cleared by—Displays the module which cleared this fault.

Description—Displays the event details.

34 | Instant User Interface
Alerts Link
Client Alerts
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide