Monitoring Link; Info; Rf Dashboard; Usage Trends - Dell PowerConnect W-IAP175P User Manual

Monitoring Link

This link is clicked by default and the following sections are displayed. These sections provide information about
the Virtual Controller and allow you to monitor the network.

Info



RF Dashboard



Usage Trends


Info
The Info section displays the following information about the Virtual Controller:
Name—Virtual Controller name.

Country Code—Country in which the Virtual Controller is operating.

IP address—IP address of the Virtual Controller.

Organization—Name of the organization.

AirWave IP—IP address of the AirWave server.

Band—Band in which the Virtual Controller is operating: 2.4 GHz band, 5.4 GHz band, or both.

RF Dashboard
The RF Dashboard section displays the following information:
IP address, Signal, and Speed information about the clients in the Dell Instant network. If the speed or signal

strength of a client is low, IP address of the client appears as a link. Click the link to monitor the client. For
more information, see
Instant Access Points, Utilization, Noise, and Errors information about the IAPs in the Dell Instant network.

If utilization, noise or errors of an IAP are not within the specified threshold, the IAP name appears as a link.
Click the link to monitor the IAP. For more information, see
Usage Trends
The Usage Trends section displays the following graphs for the Virtual Controller:
Clients Graph

Figure 102
136 | Monitoring
"Client View" on
Clients Graph
page 144.
"Instant Access Point View" on
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide
page 140.