Table 16 Infrastructure Detection Policies; Table 17 Client Detection Policies - Dell PowerConnect W-IAP175P User Manual

Table 16
Detection Level
High
The following table describes the detection policies that are enabled in Client Detection Custom settings box.
Table 17
Detection Level
Off
Low
Medium
High
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide
Infrastructure Detection Policies (Continued)
Detection Policy
 Detect AP Impersonation
 Detect Adhoc Networks
Detect Valid SSID Misuse

Detect Wireless Bridge

 Detect 802.11 40MHz intolerance settings
 Detect Active 802.11n Greenfield Mode
Detect AP Flood Attack

Detect Client Flood Attack

 Detect Bad WEP
 Detect CTS Rate Anomaly
Detect RTS Rate Anomaly

Detect Invalid Address Combination

 Detect Malformed Frame: HT IE
 Detect Malformed Frame: Association Request
Detect Malformed Frame: Auth

Detect Overflow IE

 Detect Overflow EAPOL Key
 Detect Beacon Wrong Channel
Detect devices with invalid Mac OUI

Client Detection Policies
Detection Policy
All detection policies are disabled.
 Detect Valid Station Mis association
 Detect Disconnect Station Attack
 Detect Omerta Attack
Detect FATA-Jack Attack

 Detect Block ACK DOS
 Detect Hotspotter Attack
 Detect unencrypted Valid Client
Detect Power Save DOS Attack

Detect EAP Rate Anomaly

 Detect Rate Anomaly
 Detect Chop Chop Attack
Detect TKIP Replay Attack

IDS Signature:Air Jack

 IDS Signature: ASLEAP
Intrusion Detection System | 123