Editing IAP Settings
This section explains the steps required to edit the following IAP settings:
Name
IP Address
Adaptive Radio Management (ARM) Configuration
External Antenna Configuration
Migrating from a Virtual Controller Managed Network to Mobility Controller Managed Network
Changing IAP Name
To change the IAP name, perform the following steps:
1. In the Access Points tab, click the AP of the IAP that you want to rename. The edit link appears.
Figure 45
2. Click the edit link.
Figure 46
3. Edit the IAP name in the Name text box.
4. Click OK.
Changing IP Address of the IAP
The Instant UI allows you to change the IP address of the IAP connected to the network. To change the IP
address of the IAP, perform the following steps:
1. In the Access Points tab, click the IAP for which you want to change the IP address. The edit link appears.
2. Click the edit link. The Edit AP box appears.
3. Click the Connectivity tab.
64 | Managing IAPs
Editing IAP Settings
Changing IAP Name
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide