Table of Contents
Advertisement
User Manual
7.2 Debugger Device
The debugger allows debugging tasks such as break-pointing, single-stepping, and other
standard tasks.
Interfaces
The debugger has no interfaces; the debugger is present if it is in the Device Window. To
add the Debugger Device follow these steps:
1. Select "View→Show Devices".
2. Click and drag the Debugger Device icon from the device list on the left side
into the workspace area on the right side of the Device Window.
3. Add an additional debugger for each processor you wish to debug.
Initialization and Reset State
The debugger initially is disabled and attached to processor 0.
Configuration Options
In the Main Window, select "View→Show Debugger". Click the Attach button to
configure which processor is being debugged.
To use the CPU Debugger, please refer to Section 10.1, "Using the CPU Debugger", on
page 143.
Log Messages
This device does not create log messages.
54
AMD Confidential
September 12
Chapter 7: Device Configuration
h
, 2008
Advertisement
Table of Contents
