Printing And Checking The System Settings Page - Xerox DocuPrint M205 b User Manual

Printing and Checking the System Settings Page

Print the System Settings page and check your printer's IP address.
This section includes:
• "The Operator Panel" on page 81
• "The Printer Setting Utility" on page 81
The Operator Panel
NOTE:
• The reports and lists are all printed in English.
1
Press the (System) button.
2
Select Report / List, and then press the
3
Select System Settings, and then press the
The System Settings page is printed.
4
Confirm the IP address next to IP Address under Wired Network/Wireless Network on the
System Settings page. If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP
address automatically, and then print the System Settings page again.
If the IP address is not resolved automatically, see
page 77.
The Printer Setting Utility
The following procedure uses Windows XP as an example.
NOTE:
• The reports and lists are all printed in English.
1
Click start → All Programs
your printer → Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2
Click the Printer Settings Report tab.
3
Select Reports from the list at the left side of the page.
The Reports page is displayed.
4
Click the System Settings button.
The System Settings page is printed.
If the IP address is 0.0.0.0 (the factory default) or 169.254.xx.xx, an IP address has not been
assigned.
See also:
• "Assigning an IP Address (for IPv4 Mode)" on page 77
81 Printer Connection and Software Installation
button.
→ Fuji Xerox → Fuji Xerox Printer Software for Asia-Pacific
button.
"Assigning an IP Address (for IPv4 Mode)" on
→