Auger Mark
Problem
The printed result has auger
mark.
NOTE:
•
If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
Action
The toner cartridge may be low or need to be replaced. Confirm the
amount of toner in the toner cartridge.
1
Check the toner level in the Consumables tab in the Printer
Status window of the SimpleMonitor.
2
Replace the toner cartridge as necessary.
Start Clean Developer.
1
Launch the Printer Setting Utility, and click Clean Developer on
the Diagnosis tab.
2
Click the Start button.
Troubleshooting
390