Resetting To Factory Defaults - Xerox DocuPrint M205 b User Manual

Resetting to Factory Defaults

After executing Initialize NVM and rebooting the printer, the menu parameters or data are reset to
their factory default values.
NOTE:
• The following procedure does not initialize the network settings.
– For the DocuPrint M205 f/M205 fw, to initialize the wired network settings, refer to
page 322.
– For the DocuPrint M205 fw, to initialize the wireless network settings, refer to
M205 fw Only)" on page 321
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Select Maintenance, and then press the
4
Select Initialize NVM, and then press the
5
Select System Section to initialize the menu parameters, and then press the
For the DocuPrint M205 f/M205 fw, select User Fax Section to initialize the Address Book
data for fax.
6
Select Yes, and then press the
The printer restarts automatically to apply the settings.
357 Using the Operator Panel Menus and Keypad
button.
button.
button.
button.
"Initialize NVM" on
."Reset Wireless (DocuPrint
button.