Sharpness - Xerox DocuPrint M205 b User Manual

Sharpness

You can adjust the sharpness to make the copy sharper or softer than the original.
1
For the DocuPrint M205 f/M205 fw, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document
cover.
For the DocuPrint M205 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M205 f/M205 fw Only)" on page 194
• "Making Copies From the Document Glass" on page 192
2
Press the (Copy) button.
3
Select Sharpness, and then press the
4
Select the desired setting, and then press the
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
Sharpest
Sharper
Normal*
Softer
Softest
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 195
6
Press the (Start) button to begin copying.
203 Copying
button.
button.
Makes the copy sharper than the original.
Does not make the copy sharper or softer than the original.
Makes the copy softer than the original.