Table of Contents
Advertisement
Turning On the Printer
IMPORTANT:
•
Do not use extension cords or power strips.
•
The printer should not be connected to an uninterruptible power supply (UPS) system.
1
Connect the power cord to the power connector on the rear of your printer (see
page
43).
2
Connect the other end of the cord to the power source.
3
Turn on the printer.
NOTE:
•
When you turn on the printer for the first time, follow the on-screen instructions on the LCD panel to
configure the initial settings of your printer.
See also:
• "Setting Initial Settings on the Operator Panel" on page 48
47
Basic Operation
"Rear View" on
Advertisement
Table of Contents
