Discard Size; Extel Hook Thresh; Modem Speed - Fuji Xerox DocuPrint M255 z User Manual

• Discard Size

Purpose:
To specify whether to discard text or images at the bottom of a fax page when the entire page does not
fit onto the output paper.
Values:
Off
On
Auto Reduction*
* Factory default menu setting
• ECM
Purpose:
To specify whether to enable the Error Correction Mode (ECM). To use the ECM, the remote fax
machines must also support the ECM.
Values:
Off
On*
* Factory default menu setting

• Extel Hook Thresh

Purpose:
To specify the external telephone hook detection threshold for the condition in which a telephone line
is not being used.
Values:
Lower
Normal*
Higher
* Factory default menu setting

• Modem Speed

Purpose:
To specify the fax modem speed when a fax transmission or reception error occurs.
Values:
2.4 Kbps
4.8 Kbps
9.6 Kbps
14.4 Kbps
33.6 Kbps*
* Factory default menu setting
304 Using the Operator Panel Menus and Keypad
Prints any excess at the bottom of a fax page without discarding it.
Discards any excess at the bottom of a fax page.
Automatically reduces a fax page to fit it onto the output paper.
Disables the ECM.
Enables the ECM.
Sets the external telephone hook detection threshold to Lower.
Sets the external telephone hook detection threshold to Normal.
Sets the external telephone hook detection threshold to Higher.