Available Fax Options - Fuji Xerox DocuPrint M255 z User Manual

Available Fax Options

You can use the following options for configuring the fax feature of your printer:
Option
Ans Select
Auto Answer
Fax
Auto Ans.
TEL/FAX
Auto Ans.
Ans/FAX
Line Monitor
Ring Tone
Volume
Line Type
Dialing Type
Interval Timer
Number of
Redial
Redial Delay
Junk Fax
Filter
Remote Receive
Remote Rcv
Tone
Description
The printer does not automatically receive faxes. To receive an
TEL Mode
incoming fax, you need to pick up the handset of the
connected external telephone, press the 2-digit code, and
press the
This option is selected by default and the printer automatically
FAX Mode
receives faxes.
When the printer receives an incoming fax, the external
TEL/FAX Mode
telephone rings for the period of time specified for Auto Ans.
TEL/FAX, and then the printer automatically receives the fax.
If an incoming call is not a fax, the printer beeps from the
internal speaker indicating that the call is a telephone call.
The printer shares the telephone line with an answering
Ans/FAX Mode
machine and monitors the line for a fax tone. It will pick up an
incoming call if it hears a fax tone. This option is not available
in regions where a serial phone system is employed.
To use this option, you need to subscribe the Distinctive Ring
DRPD Mode
Pattern Detection (DRPD) service from your telephone
company that assigns multiple telephone numbers to a single
telephone line and distinguishes each line with a distinctive
ring pattern. Once this service is activated, then you can
configure your printer to monitor the line for the distinctive ring
pattern.
Specify a period of time for which the printer waits before entering the FAX Mode
upon reception of an incoming call.
Specify a period of time for which the printer waits before entering the FAX Mode
when the external telephone receives an incoming call.
Specify a period of time for which the printer waits before entering the FAX Mode
when the answering machine receives an incoming call.
Select a volume level of the sound that the printer emits from the internal speaker
while establishing a connection for fax transmission.
Select a volume level of the ring tone that the printer emits from the internal speaker
to indicate an incoming telephone call while in the TEL/FAX Mode.
Select the line type.
Select the dialing type.
NOTE:
• DP (10pps) is not displayed when Australia is set for Region.
Specify an interval between transmission attempts.
Specify the number of redial attempts to make when the destination fax number is
busy. If you specify 0, the printer will not redial.
Specify an interval between redial attempts.
Select whether to reject faxes from the numbers that are not included in the Address
Book.
Select whether to use this option. With this option enabled, you can pick up the
handset and enter the remote receive code to receive a fax.
Specify the remote receive code in two digits for the Remote Receive option.
(Start) button.
Faxing 275