Operator Panel - Fuji Xerox DocuPrint M255 z User Manual

When the WPS-PBC operation is successful and the printer is rebooted, wireless LAN connection is
completed.

• Operator Panel

1
Select Operator Panel, and then click Next.
2
Follow the on-screen instructions until the Check Setup screen appears.
3
Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
If you see any errors, click Trouble Shooting Guide and follow the instruction.
4
If you agree to the terms of the License Agreement, click I accept the terms of the license
agreement to continue the installation process, and then click Next.
5
Check if the printer to be installed is listed in the Select Printer screen, and then click Next.
NOTE:
• If the printer to be installed is not listed in the Select Printer screen, try either of the following steps:
- Click Refresh to update the information.
- Click Add Printer, and then enter the details of the printer manually.
6
Configure the required items on the Enter Printer Settings screen, and then click Next.
7
Select the software to be installed, and then click Install.
8
Click Finish to exit this tool.
The wireless configuration is complete.
Printer Connection and Software Installation 93