Dynamic Methods Of Setting The Printer's Ip Address - Fuji Xerox DocuPrint M255 z User Manual

Dynamic Methods of Setting the Printer's IP Address

There are two protocols available for dynamically setting the printer's IP address:
• DHCP
• DHCP/Auto IP (enabled by default)
You can turn on/off either protocol using the operator panel, or use the CentreWare Internet Services
to turn on/off the DHCP protocol.
NOTE:
• You can print a report that includes the printer's IP address. On the operator panel, press the
button, select Report / List, press the
button. The IP address is listed on the System Settings page.
Using the Operator Panel
To turn on/off either the DHCP or the AutoIP protocol:
1
On the operator panel, press the
2
Select Admin Menu, and then press the
3
Select Network, and then press the
4
Select TCP/IP, and then press the
5
Select IPv4, and then press the
6
Select Get IP Address, and then press the
7
Select DHCP/AutoIP or DHCP, and then press the
Using the CentreWare Internet Services
To turn on/off the DHCP protocol:
1
Launch your web browser.
2
Enter the IP address of the printer in the address bar, and then press the Enter key.
The CentreWare Internet Services appear on your browser.
3
Select Properties.
4
Select TCP/IP from the Protocol Settings folder on the left navigation panel.
5
In the IP Address Mode field, select the DHCP/AutoIP option.
6
Click the Apply button.
68 Printer Connection and Software Installation
button, select System Settings, and then press the
(System) button.
button.
button.
button.
button.
button.
button.
(System)