Resetting To Factory Defaults - Fuji Xerox DocuPrint M255 z User Manual

Resetting to Factory Defaults

Enabling the Initialize NVM feature and rebooting the printer will reset all the printer settings and the
Phone Book (fax) and Address Book (scan) data to their factory default menu settings.
NOTE:
• The following procedure does not initialize the network settings.
- To initialize the wired network settings, see
- To initialize the wireless network settings on the DocuPrint M255 z model, see
M255 z only)" on page
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Select Maintenance, and then press the
4
Select Initialize NVM, and then press the
5
Select System Section to initialize the printer settings, and then press the
Select User Fax Section to initialize the Phone Book data for fax.
Select User Scan Section to initialize the Address Book data for scan.
6
Select Yes, and then press the
The printer restarts automatically with the factory default menu settings.
"Initialize NVM" on page
295.
button.
Using the Operator Panel Menus and Keypad
297.
button.
button.
button.
"Reset Wireless (DocuPrint
button.
335