General Care; Redistributing Toner - Xerox Phaser 3052NI User Manual

Table of Contents

Advertisement

General Care

Redistributing Toner

When the toner cartridge is near the end of its life:
White streaks on prints or light printing occurs.
The toner LED light at the top of the control panel is blinking orange if the Low Toner Alert feature
has been enabled.
If either of these conditions occurs, you can temporarily improve print quality by redistributing the
remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after
you have redistributed the toner.
Follow these steps to redistribute the toner in your cartridge and thus temporarily improve print quality.
1.
Open the front cover of the printer.
2.
Pull out the cartridge using the handle with the colored
label.
3.
Slowly shake the cartridge five or six times to distribute
the toner evenly inside the cartridge.
Note:
If toner gets on your clothing, wipe it off with a dry
cloth and wash clothing in cold water. Hot water sets
toner into fabric.
®
®
Xerox
Phaser
3052/3260
User Guide
General Care
119

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 3260dniPhaser 3260di

Table of Contents