Dynamic Methods Of Setting The Printer's Ip Address - Fuji Xerox DocuPrint CP305 d User Manual

Dynamic Methods of Setting the Printer's IP Address

There are two protocols available for dynamically setting the printer's IP address:
• DHCP (enabled by default)
• AutoIP
You can turn on/off both protocols using the operator panel, or use CentreWare Internet Services to
turn on/off DHCP.
NOTE:
• You can print a report that includes the printer's IP address. On the operator panel, press the Menu button,
select Report/List, press the
IP address is listed on the Printer Settings page.
Using the Operator Panel
To turn on/off either the DHCP or AutoIP protocol:
1
On the operator panel, press the Menu button.
2
Select Admin Menu, and then press the
3
Select Wired Network, and then press the
4
Select TCP/IP, and then press the
5
Select IPv4, and then press the
6
Select Get IP Address, and then press the
7
Select DHCP / Autonet, and then press the
Using CentreWare Internet Services
To turn on/off the DHCP protocol:
1
Launch your web browser.
2
Enter the IP address in the browser's Address field, and then press the Enter key.
3
Select Properties.
4
Select the Protocol Settings folder on the left navigation panel.
5
Select TCP/IP.
6
In the Get IP Address field, select the DHCP / Autonet option.
7
Click the Apply button.
button, select Printer Settings, and then press the
button.
button.
button.
button.
button.
button.
button. The
Network Basics 66