Fuji Xerox DocuPrint CP305 d User Manual page 124

Using the Commands
You can also print PDF files using the lpr or ftp command. When you print using these commands, the
following PDF settings on the operator panel become effective.
• Quantity
• 2-Sided Print
• Print Mode
• Password
• Collated
• Output Size
• Layout
• Output Color
NOTE:
• When you print using the lpr command, the print quantity must be set also using lpr command. In such case,
the Quantity setting on the operator panel becomes invalid. If you do not specify the quantity using the lpr
command, the printer recognizes the quantity as "1 set".
• To print PDF files using the lpr or ftp command, you must enable the printer's LPD or FTP port using the
operator panel or CentreWare Internet Services (default: Enable).
Using the lpr command
In the command prompt, enter the lpr command as described in the following example:
Example: Printing "event.pdf" when the printer's IP address is 192.168.1.100.
C:\> lpr -S 192.168.1.100 -P lp event.pdf
Using the ftp command
In the command prompt, enter the ftp command as described in the following example:
Example: Printing "event.pdf" when the printer's IP address is 192.168.1.100.
C:\> ftp 192.168.1.100
Connected to 192.168.1.100.
220 FUJI XEROX DocuPrint XXXX
User (192.168.1.100:(none)):
331 Password required
Password:
230 Logged in
ftp> bin
200 Command successful
ftp> put event.pdf
200 Command successful
150 Opening data connection
226 Transfer complete
ftp: xxxxx bytes sent in xxxSeconds
xxxxxkbytes/sec.
ftp>
123 Printing Basics