Jagged Characters - Fuji Xerox DocuPrint CP305 d User Manual

Jagged Characters

Problem
The printed result has jagged
characters.
219 Troubleshooting
Action
Set Screen to Fineness in the print driver. The following procedure
uses the PCL 6 driver as an example.
1 On the Advanced Settings tab, set Screen under Items: to
Fineness.
If the problem persists, set Image Quality to High Quality in the print
driver.
Set Image Quality to High Quality in the print driver. The following
procedure uses the PCL 6 driver as an example.
1 On the Image Options tab, select High Quality from Image
Quality.
If the problem persists, enable Bitmap Smoothing in the print driver.
Enable Bitmap Smoothing in the print driver. The following
procedure uses the PCL 6 driver as an example.
1 On the Advanced Settings tab, set Bitmap Smoothing under
Items: to On.
If the problem persists, enable Bitmap Text Smoothing in the print
driver.
Enable Bitmap Text Smoothing in the print driver. The following
procedure uses the PCL 6 driver as an example.
1 On the Advanced Settings tab, set Bitmap Text Smoothing
under Items: to On.
If the problem persists, check whether or not the downloaded font you
are using is recommended.
If using a downloaded font, ensure that the font is recommended for
the printer, operating system, and the application being used.
If the problem persists, contact the Fuji Xerox local representative
office or an authorised dealer.