Fuji Xerox DocuPrint CP305 d User Manual page 156

IPv4 Get IP
Address
IP Address
Subnet Mask
Gateway Address
IPsec Disable
• Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and
then on again.
Values:
LPD
Port9100
FTP
IPP
SMB (TCP/IP)
SMB (NetBEUI)
WSD
SNMP (UDP/IP)
155 Using the Operator Panel Menus
DHCP /
*
Autonet
BOOTP
RARP
DHCP
Panel
*
Disable
*
Enable
Disable
*
Enable
Disable
*
Enable
Disable
*
Enable
Disable
*
Enable
Disable
*
Enable
Disable
*
Enable
Disable
*
Enable
Sets the IP address automatically. A random value in the
range of 169.254.1.0 to 169.254.254.255 that is not currently
in use on the network is set as the IP address. The subnet
mask is set as 255.255.0.0.
Sets the IP address using BOOTP.
Sets the IP address using RARP.
Sets the IP address using DHCP.
Use this option when you want to set the IP address manually
on the operator panel.
When an IP address is being set manually, the IP is allocated
to the printer using the format nnn.nnn.nnn.nnn. Each octet
that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
254. 127 and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.
When an IP address is being set manually, the subnet mask is
specified using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255.
255.255.255.255 cannot be specified as the subnet mask.
When an IP address is being set manually, the gateway
address is specified using the format nnn.nnn.nnn.nnn. Each
octet that makes up nnn.nnn.nnn.nnn is a value in the range of
0 to 254. 127 and any value in the range of 224 to 254 cannot
be specified for the first octet of a gateway address.
Disables IPsec.
Disables the Line Printer Daemon (LPD) port.
Enables the LPD port.
Disables the Port9100 port.
Enables the Port9100 port.
Disables the FTP port.
Enables the FTP port.
Disables IPP port.
Enables IPP port.
Disables SMB TCP/IP port.
Enables SMB TCP/IP port.
Disables SMB Net BEUI port.
Enables SMB Net BEUI port.
Disables WSD port.
Enables WSD port.
Disables the Simple Network Management Protocol (SNMP)
UDP port.
Enables the SNMP UDP port.