Xerox 4127 User Manual page 107

Symptoms
Paper is often jammed Is paper loaded properly in the paper
or wrinkled. tray?
Is the paper tray set properly?
Is the paper damp?
Is the paper curled?
Are the paper and paper tray settings
correct?
Paper is often jammed Are there any torn pieces of paper still
or wrinkled. remaining inside the machine or is
(continued) there a foreign object in the machine?
Is out-of-spec paper loaded in the tray? Replace with paper that meets
Is the paper tray loaded past its
maximum fill line?
Is the paper guide set correctly?
An error message is Check the position of the paper guides
displayed after paper is at the front side of paper Tray 5
loaded in paper Tray 5 (Bypass).
(Bypass) and the Start
button is pressed.
Check
Load paper correctly.
Refer to Loading Paper into Trays
on page 2-1.
To ensure tray closure, Firmly push
it in as far as possible.
Refer to Loading Paper into Trays
on page 2-1.
Replace with paper from a new
ream.
Refer to Loading Paper into Trays
on page 2-1.
Either turn the paper so that the
curl is facing down in the paper
tray, or replace with paper from a
new ream.
Refer to Loading Paper into Trays
on page 2-1.
Refer to Curled Output Solutions on
page 7-57
Make sure the paper and paper tray
selected match the paper size
settings.
Refer to "Paper Tray Settings" in the
System Administration Guide.
Open the door of the machine or
slide out the paper tray to remove
the torn paper or the foreign object.
Refer to Paper Jams on page 7-22,
Loading Paper into Trays on
page 2-1.
machine specifications.
Refer to Loading Paper into Trays
on page 2-1.
Load paper in the paper tray so
that it does not exceed the
maximum fill line.
Refer to Loading Paper into Trays
on page 2-1.
Load the paper correctly, and apply
the paper guides lightly.
Refer to Loading Paper into Trays
on page 2-1, Change/Confirm the
Tray Settings on page 2-14.
Set the paper guides to the correct
positions.
Refer to Loading Paper into Tray 5
(Bypass) on page 2-5.
Xerox 4112/4127 EPS
Problem Solving
Remedy
7-5
User Guide