Identifying the Components
1.
Provides manual control of the various functions of the HCS.
2.
Collated sets (up to a total of 5000 sheets) are transported to the Stacker Tray located on a moveable
Stacker Cart.
3.
Up to 500 sheets are transported to the Top Tray:
•
When sheets are purged after a paper jam.
•
When the Sample Set button is selected.
•
When selected as an Output Location.Labels must be sent to the Top Tray.
4.
Only used when a second stacking/finishing device is installed. This path transports collated sets
through the HCS to a connected finishing device or to another HCS.
1
2
Addendum
3
4
Xerox 4112/4127 EPS
User Guide
9-23