Paper Jams In Optional Tray; Feeder) - Xerox 4127 User Manual

Problem Solving
Paper jams in optional Tray 6 (1-drawer Oversized High
Capacity Feeder)
Note
If your machine is equipped with the optional 2-drawer Oversized High Capacity Feeder (OHCF),
refer to the section entitled Optional 2-drawer Oversized High Capacity Feeder (Trays 6 and 7)
on page 9-1 for specific information. The optional 2-drawer OHCF may not be available in your
market area.
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Pull out Tray 6.
Note
To avoid tearing paper, review where the paper jam occurred before pulling out a tray. Torn
paper remaining inside the machine can cause machine malfunction.
2. Remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
3. Push the tray in gently until it comes to a stop.
7-28 Xerox 4112/4127 EPS
User Guide