Optional Finishing Accessories - Xerox 4127 User Manual

Optional finishing accessories

Finishing accessory
Standard Finisher (with or without
optional C/Z Folder)
Booklet Maker Finisher with optional C/Z
Folder
Booklet
Maker Tray
High Capacity Stacker (HCS) and required
Interface Module
Description
The Standard Finisher (with
or without the optional C/Z
Folder) allows you to staple
or hole-punch your
output. The Top Tray holds
of 500 sheets (20lb/80gsm),
while the Stacker Tray holds
3,000 sheets (20 lb/80 gsm).
The optional C/Z Folder
allows C-folding and Z-
folding of 8.5 x 11 in./A4
output, and 11 x 17 in./A3
media.
The Booklet Maker Finisher
(with or without the optional
C/Z Folder) includes all the
features of the Standard
Finisher plus:
• Automatically creates
booklets of up to 25
pages
• Creates booklets from
12 x 18 in./SRA3, 11 x
17 in./A3, 8.5 x 14 in.
and 8.5 x 11 in./A4
The HCS provides stacking
and offsetting capabilities
for output, while the
HCS
Interface Module (IM) acts
as a communication device
and paper path between the
printer and the High
Capacity Stacker.
Note:
The Interface Module is
required in order to use the
HCS.
Product overview
Where to find
information
Information on the
Standard Finisher (and
otpional C/Z Folder) can
be found throughout this
user guide. Refer to the
table of contents and the
Index for specific page
locations.
Information on the
Booklet Maker Finisher
(and optional C/Z Folder)
can be found throughout
this user guide. Refer to
the table of contents and
the Index for specific page
locations
Information on the HCS
and Interface Module can
be found in this user guide
in Chapter 14 Addendum.
Xerox 4112/4127 EPS
User Guide
1-9