Loading Tab Paper Into Tray 8 (Post-Process Inserter) - Xerox 4127 User Manual

3. Place the tab paper:
• With the side to be printed facing up.
• The bottom side to be fed first.
• Lightly along the paper guide until it comes to a stop
Note
To print a tab stock job, see; Network printing on tabs on page 3-8

Loading Tab Paper into Tray 8 (Post-Process Inserter)

1. Hold the center of the paper guides and slide them to the desired paper size.
2. If the paper is preprinted, load the paper with the printed side facing up and with the tab
side to be fed first.
Tab edge
Tab edge
Paper and other Media
Xerox 4112/4127 EPS
User Guide
2-13