Loss Of Power - Xerox 4127 User Manual

Addendum
Fault code Possible cause
049 941 UI indicates the Stacker Cart
and/or Tray needs to be reset
049 945 The UI displays a message
indicating that the Top Tray is
full.
049 960 Message on machine UI states
that the Stacker Tray needs to
be empty before reaching its
full capacity.
049 960 The UI displays the following
049 961 message, "Take out the paper
049 962 stack."
049 963
049 964
049 967
049 969
049 970
049 971
049 972

Loss of power

If power is interrupted to the HCS:
• Ensure the power cord is plugged in to the proper wall receptacle
• Ensure that the machine power is switched "On"
• Ensure that the Ground Fault Indicator is in the "On" position
• If the power has not been restored by checking the above items, then call for service
9-30 Xerox 4112/4127 EPS
User Guide
Recommended solution
1. Press the Unload button. The Wait light
blinks until the Stacker Tray has reached the
down position.
2. When the Stacker Tray has reached the
down position, open the front door.
3. Position the Stacker Cart securely into the
HCS.
4. Close the front door.
Remove all the paper from the Top Tray.
• Empty the Stacker Tray.
• Check the output at the for paper curl
exceeding 1 in./25.4 mm.
• If the paper curl on the output exceeds
1 in./25.4 mm, adjust the paper curl at
the Interface Module; refer to page
page 9-20 for specific instructions.
1. Press the Unload button. The Wait light
blinks until the Stacker Tray has reached the
down position.
2. When the Stacker Tray has reached the
down position, open the front door.
3. Remove the Stacker Cart.
4. Remove all the stacked paper.
5. Position the Stacker Cart securely into the
HCS.
6. Close the front door.
7. Power off, then power on