11-14
Program
Code
FLASH 70
Initialize System Speed Numbers
Technical Manuals Online! - http://www.tech-man.com
Table 11-4: Exception Table Defaults
Flex
Button
1
Allow Table A
2
Deny Table A
3
Allow Table B
4
Deny Table B
5
Special Table 1
6
Special Table 2
7
Special Table 3
8
Special Table 4 (Home Area Code)
9
Area Code for Special Table 1
10
Area Code for Special Table 2
11
Area Code for Special Table 3
12
Displaying Toll Table Entries
Programming Steps
1. Press the SYSTEM SPEED NUMBERS flexible button (FLASH 80,
Button #6). The following message displays:
IN ITIA LIZ E S YS
P RE SS
HO LD
2. To initialize the System Speed bins, press the HOLD button. A
confirmation tone is heard.
Description
Numbers entered in the System Speed Dial Table may be initialized by
clearing all bins to their original default value. Bins 020-999 are returned
to their default value (empty) upon initializing the Speed Dial Table.
When upgrading software from FP2 to FP3, all previously programmed
speed dial buttons will be lost.
Features
TOLL RESTRICTION
SP EE D N O
Introduction
Default Value
(after initialization)
Table Cleared
(No Entries)
Table Cleared
(No Entries allowed,
No Area Code specified)
Table Cleared
(No Entries allowed)