Vodavi Starplus Triad-S System Programming Manual page 199

4-30
Technical Manuals Online! - http://www.tech-man.com
Example:
2 0
B u t to n
N u mbe r
Some or all outside CO lines may be grouped together and accessed via a
POOL button for the purpose of placing an outgoing CO call. Pressing
this button accesses the highest numbered unused CO line in that CO
line group.
When upgrading software from FP2 to FP3, which supports this feature,
all previously programmed trunk groups will be lost.
Assigning a Feature Button (admin programmable):
Enter: [BB], [4], [XXX], [HOLD]
This feature enables flexible buttons to be programmed from a remote
location. Range programming can be used to assign these buttons to
multiple stations. When a button is assigned as a feature button [4], the
programmer can program any features on the buttons.
Unassigning (lock out) a Button:
Enter: [BB], [#], [HOLD]
If SLT stations must be programmed for off-hook preference, program
the desired CO line, or CO line group the SLT must access when going
off-hook.
Assigning a CO Line for an SLT (with off-hook preference):
Enter: [01], [1], [LLL], [HOLD]
LLL = CO Lines (001-012)
Assigning a CO Line Group for an SLT (with off-hook preference):
Enter: [01], [3], [GG], [HOLD]
GG = Line Group Number (00-23)
3 02 HOL D
P oo l Lin e
Co d e G r ou p
Page B Introduction