Special Table - Vodavi Starplus Triad-S System Programming Manual

Toll Restriction

Special Table

Technical Manuals Online! - http://www.tech-man.com
Programming Steps
To program a Special Table, it is first necessary to assign an area code to
the table (except for the home area code).
1. Press the appropriate AREA CODE TABLE (#1 to #3) flexible button
(FLASH 70, Buttons #9 to #11). The following message displays:
SP ECIA L TAB LE
2. Enter a valid area code.
3. Press the HOLD button to save the entry. A confirmation tone is heard
and the display updates.
Entering Office Codes in a Special Table
1. Press the SPECIAL TABLE (#1 to #4) flexible button (FLASH 70,
Buttons #5 to #8) that corresponds to the area code programmed
above. The following message displays:
SP ECIA L TAB LE 1
XXX = Area Code
2. Enter the office codes that are to be allowed or removed as follows:
XXX [1] = Allow Code
XXX [0] = Remove Code from the list
(XXX = An office code from 200 to 999)
3. Press HOLD after every code entered. A confirmation tone is heard
and the display updates. Multiple codes may be entered in a row. The
display updates showing the first six codes in ascending order.
1 AC
A C XXX
9-13